Hyundai NFC Key Card (2024)

FAQs

How to program Hyundai NFC key card? ›

Hyundai Smart Key Fob Not Detected

Something as simple as a dead battery in your smart key might be the problem. After you replace the battery, you'll be able to determine if that was the issue. Replacing your battery involves a few easy steps. Pry off the battery cover on the back of your smart key fob.

The NFC Key Card can be used to unlock and start your car if your phone is not available. You can keep the NFC Key Card in your wallet or purse as a backup.

Is Hyundai Digital Key safe? Hyundai Digital Key runs securely through Near Field Communication technology. This system exhibits a high level of security. The NFC wireless data communication occurs only when the device and the reader are within a few centimeters of each other.

If you have a brand new key fob, you will need to stop by a Hyundai service center to have it programmed to your car. If you're in a pinch on your Reno commute and don't have time to replace your key fob battery or reprogram your keyfob, you can use the Hyundai Digital Key to access your vehicle from your smartphone.

For android, place backside-middle of phone onto Tap Tag. Your smartphone will make a sound and/or vibrate when your NFC tag is officially encoded, which takes less than one second. If you get a red exclamation, simply try again. This check mark symbolizes that your NFC chip is programmed!

If your smart key fails to start your Hyundai vehicle and it's not detecting any signal from the fob, or if there is an error on the dash panel of your car, there are a few things you can try: Check the battery: Make sure the battery in your smart key fob is not dead.

You can fix many problems regarding the immobiliser or transponder by replacing the battery in the key. Many of these keys rely on a small battery that communicates the security code to the engine immobiliser. Therefore, to not damage the transponder chip, you should take great care when replacing the battery.

This usually happens because of low batteries, but shock can also cause the fob to lose its pairing. Most remotes can be reset, so check your car's user manual for the resetting sequence. If resetting fails to solve the problem, the fob will need to be reprogrammed.

An NFC card uses Near-Field Communication to access rooms without touching the door. It's usually the first step in moving towards smart rooms. The card's embedded circuits can communicate with various electronic devices – you can use it for payments and accessing rooms, the gym, the sauna and the rooftop.

What is NFC card mode? ›

NFC lets you share small payloads of data between an NFC tag and an Android-powered device, or between two Android-powered devices. Tags can range in complexity. Simple tags offer just read and write semantics, sometimes with one-time-programmable areas to make the card read-only.

The individual will need to create a MyHyundai account and download the free Hyundai Digital Key app, and then you can send them an invite via the app to receive their Shared Key.

Hyundai Remote Programming and Key Fob Programming

We can program Hyundai car key fob and remotes for you. Simply bring your car key remote (preferably with your car) to any of our locksmith stores and we will quickly program it to function properly with your car.

If you can't find your key fob, you'll either need to order and program a replacement fob or use Hyundai Digital Key.

Place your NFC tag near your device's NFC reader, usually located at the back of the device. Follow the app's instructions to write your data onto the tag. This process usually involves tapping a “Write” button and waiting for confirmation that the data has been successfully written.

Get inside your vehicle and close all of the doors. Use your key and turn your vehicle into accessory (ACC) mode on the ignition. Next, you'll hold the “open” or “unlock” button on your key fob until you notice your vehicle's lights flashing.

Remember that the key fob programming instructions will only work if you have a key fob already programmed to a previous Hyundai you owned. If you are purchasing a new Hyundai, you will need to visit a Hyundai service center to have an expert technician program the key fob to your vehicle instead.